Admin Control Panel

New Post Change Layout Sign Out

Mar 1, 2009

More fun with SU wheels!

I'm so glad ya'll liked my tutorial on turning a SU jumbo wheel into a set of 13 stamps. If you missed it, you can find it HERE.

The truth is, I am as much a stamp COLLECTOR as I am a stamper. Add to that, that I love matching things and the results are... well... let's examine exhibit A. LOL Below is a picture of my wheel collection. I pulled the drawers from my "tower of power" (Click HERE if you need to know what a tower of power is LOL) for easy photographing. Sure, there are several that are stained in black so I KNOW I have used those. Most likely they were used to make treats of some sort for my children's classmates. Look at all that uninked rubber! It's a SHAME! It's not that they aren't cute, or that they couldn't have been used for a project or two... it's that:

1.) wheels are annoying to me
2.) since the wheels aren't stored WITH the set, I am sometimes just too lazy to go get it
3.) just because... LOL

Yet I still buy them because:

1.) I *need* to have the matching set
2.) They are just TOO cute
3.) I *need* to have the matching set!!!

Of course, what good is a matching set if I don't use them as a set? LOL
So, I am on a mission to figure out WHICH wheels I WILL use and do whatever it takes to ensure that I WILL use them. :) I've already shown you how to cut the wheel into MANY pieces, but today I am going to show you a few alternate ways to alter your wheels.

First, I grabbed my Under the Stars stamp set from SU with the matching wheel skeeters. Admittedly, I purchased this set when it first came out and haven't used it yet! OOPS! *note to self: use ASAP
Just as I did with my first tutorial, I used a craft knife to slit the seam of the rubber and unpeeled it from the wheel.


Then I plotted my attack. I grabbed a pre-folded A2 card to see how long I needed the rubber to be in the event that I would want to use it as a border.


I moved the rubber to the right and discovered there was room enough to cut out JUST one of the little skeeters AND have room enough to stamp a border on an A2 card.



I drew a line to show you where I planned my cut.


See?


Now, trim your skeeter. You can even keep the star and dots portion as a mini background stamp. You may use that someday. :) I showed you the original skeeter stamp from the stamp set as reference. Now, you have 2 sizes of skeeters to use.


Check it out all inked up. Cute, huh?

Here is a picture of the 2 skeeters stamped next to each other. Please ignore my messy handwriting. LOL

This time, I decided to stick the stamps INSIDE my case. The stamp case is flexible enough to expand a tad and hold the rubber just fine. I wouldn't stack it with a ton of weight on it, or I would guess the foam would compress eventually. BUT, this way the wheel is WITH the set, it is READY to use and I am 99% more prone to actually USE IT! YAY!


Okie dokie, I LOVE this stamp set. The wheel that coordinates with it is beautiful! I have been wanting it forever! I placed an order the other day and had this wheel on my list. Right before I was ready to put down my order in "ink", I asked my daughters to go check and see if I had it... just in case... and you know... I DID HAVE IT! What a dork! LOL I was about to order another one. Needless to say, I have never used this wheel. *shakes head at self* You know the saying... out of sight, out of mind. Not anymore! LOL


You know the drill, cut the rubber, unpeel the rubber, cut the foam, stick the rubber to the foam and here is what you'll have. The problem with this one is the edge. You know you'd get ink on the edge and then on your paper and it would be yucky! So, trim the edges just like you would when you trim a stamp.

Here you can see the pieces I trimmed from each side.


Now, stick your stamp (using the cling foam of course) to the inside of your matching stamp set.

Now your wheel is WITH your stamp set and you'll use it. :) PLUS you won't try to order it twice! LOL


This acrylic block is what I used to stamp the long piece of rubber. It is JUST shy of long enough, but stamped the image just fine. I believe it was from Inkadinkado. It is 6 1/2" long. To accommodate your jumbo and standard wheel rubber "as is" you would need a block about 7 1/2" long. Remember, you can also use a wood mounted rubber stamp with a sticker as a mounting block. The cling foam sticks well to the sticker. :)


Here is another block I use. This came from Hobby Lobby and I got it during a 1/2 off sale for about $4. It is about 6" long.


I got lots of questions about the cling foam I used.
Here are some sources and reviews for you:
I got the cling foam I used this time from CHF HERE. They have free shipping with orders over $35, ship quickly and I have had great service from them. Be advised that they do not carry the "brand name" Easy Mount cling foam. It is also the least expensive option at $3.49 for an 8 X 10 sheet.
Eclectic Paperie also has the cling foam HERE. They carry the brand name Easy Mount cling foam and it runs $4.49 per 8 1/2 X 11 sheet. They do not have free shipping, but they have lots of other stuff in their store that you may want/"need". :) I have ordered from them numerous times and have received great service.
Starving Artistamps also carries the name brand Easy Mount cling foam HERE. They ALSO carry THIN Easy Mount HERE. that is ideal for smaller stamps and tiny sentiments. It helps prevent rocking with those sizes. They offer free shipping on purchases over $65.
Again, look at all the wheels you have and decide if you would use them more as a "set" (like my previous post), a wheel (as is), or as a one-piece unmounted strip (mounted on cling foam, but not cut apart).
Don't be afraid, you can do it! LOL

If you have any questions, feel free to leave a comment on this post. Make sure to include your e-mail address so I can get back to you.
Have a wonderful week!

19 comments:

  1. That's cool too. I thought I was the only one that collected stamps. Wow I don't have the need wheel for stamp set obsession but then again I never thought of it that way. eek.

    ReplyDelete
  2. Brilliant ideas!! I LOL when I read that you discovered you had the wheel already -- only because that is the sign of a PROFESSIONAL stamper AND it's happened to me, too! You'll have to go to the next SAA meeting with me and my friends (Stamper Addicts Anonymous) - hehe!

    ReplyDelete
  3. I'm so wheel challenged. So much so that I've avoided buying wheels just because I get so frustrated using them. Thanks for the demo on how easy it is to unmount them.

    ReplyDelete
  4. It only took a couple of times of using a stamp set and suddenly NEEDING the matching wheel to teach me to purchase both at the same time! So yes, I have all these wheels that I have never used! Still. . . . I don't have the courage to unmount them yet. It would save me some storage room, but then I could get rid of all those wheel handles and cartridges. *gasp* *shivers* No, I'm not ready yet!

    ReplyDelete
  5. You could also use a cuttlebug mat, the B, as a block for larger unmounted stamps. I'm sure that other die cutting machines also have "glass like" mats, and those were perfectly!

    ReplyDelete
  6. Great ideas!

    Thanks for sharing,
    IfatArt

    ReplyDelete
  7. this is such a great idea thanks for sharing
    Hugs
    Norine

    ReplyDelete
  8. Great ideas, Jody. My wheels are out of sight and mind in a Pringle tube and a plastic tub. Haven't used them in so long. Will have a look at them now and see what I can do. Thanks bunches.

    ReplyDelete
  9. I've done 2 wheels allready! Thanks for sharing... at least this way I will use them more!

    ReplyDelete
  10. Holy cow girl, you do have a lot of wheels...haha! I find them annoying to use too and I have some cute ones...like that Neighbourhood wheel that goes with All in the Family....I'm going to do that one TODAY! TFS!

    ReplyDelete
  11. I find the wheels totally annoying too - I unmounted mine a year or so ago & had just been using double-sided tape when I stamp them. Your idea of the foam is much better & storing them with the set - hadn't thought that far ahead. LOL. Thanks for all the great ideas!

    ReplyDelete
  12. I took all mine off the wheels too awhile back....I still have not used them more....lol! I may need to look at them again to see if I can cut some out as single images!

    ReplyDelete
  13. love your idea of cutting off a smaller image! i will have to check mine out. i have already removed mine from the wheels, except my new friendly words, your other post is very inspiring, for that wheel.
    did you know you can use a perm ink and stamp your image on the cling side? so that you can see exactly what is one the unmounted wheel... i stamped mine and love them. just a thought.

    ReplyDelete
  14. Thanks so much for the info, Jody. I'm sure I'll get much more use out of my many wheels, now. I have a hard time getting consistent pressure on both sides of the wheel--so cutting them up is a great option, and also having a long stamp is a great option for me. Thanks for the info on the cling foam, too. I'll be looking into that.
    Gail S.

    ReplyDelete
  15. I love what you've done with unmounting the wheels. I haven't checked out your post about converting the wheel into 13 individual stamps...that's next up, LOL! My question is, you show the unmounted wheel stored in with the set...but what about your post way back when where you split all your stamps up and organized by category? I followed suit and have loved it...how are you handling the unmounted wheels in that situation? Thanks Jody!

    ReplyDelete
  16. I love what you've done with unmounting the wheels. I haven't checked out your post about converting the wheel into 13 individual stamps...that's next up, LOL! My question is, you show the unmounted wheel stored in with the set...but what about your post way back when where you split all your stamps up and organized by category? I followed suit and have loved it...how are you handling the unmounted wheels in that situation? Thanks Jody!

    ReplyDelete
  17. Oops! Forgot my email...stamperchick@hotmail.com

    ReplyDelete
  18. obviously many of us can relate to you. I think I am a bit scared to unmount my wheels but it is a great idea. A brave and innovative choice. Definately something to keep in mind:)

    Have a great week!

    ReplyDelete

Thanks for taking the time to leave a comment. I appreciate you reading my blog.

 
Pin It button on image hover